VVEA-504R-01T32

18 HP 50,0 kW cooling 50,0 kW heating R410A B efficiency HR Eurovent: 18.06.004 Eurovent+

↓ Run simulation for this unit ♡ Add to favorites

AIRWELL VVEA-504R-01T32 is a heat recovery VRF outdoor unit with a cooling capacity of 18 HP (50,0 kW). It uses R410A refrigerant and has SEER 5,06 / SCOP 3,64 efficiency ratings. It offers a cooling sound power of 88,0 dB(A), a 1410×1690×750 mm body, connection for up to 30 indoor units. It is ranked #143 by SEER among 155 models in the 18 HP class (class average SEER 6,58).

18 HP class 155 models SEER rank: 143 Class avg. SEER 6,58 Highest 8,67

Performance

Cooling
Nominal capacity	50,00 kW
Power input	21,01 kW
EER (rated)	2,38
SEER (seasonal) ℹ	5,06
Heating
Nominal capacity	50,00 kW
Power input	16,29 kW
COP (rated)	3,07
SCOP (seasonal) ℹ	3,64
Test configuration
Indoor unit combination	CVTA-070N-01M224+CVTA-050/045N-01M224 (Cassette)

Physical & Environmental

General
System type	HR (Heat Recovery)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	30
Fan count	2
Compressor count	2
Dimensions & Weight
Dimensions (H×W×D)	1690 × 1410 × 750 mm
Weight	366 kg
Sound (LwA)
In cooling	88,0 dB(A)
In heating	88,0 dB(A)
Sound pressure (1m)
In cooling	63,0 dB(A)
In heating	—
Operating temperature
Cooling range	-5°C ÷ 50°C
Heating range	-23°C ÷ 21°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.690 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.