SGM100HPPROX

10 HP 28,0 kW cooling 28,0 kW heating R410A A++ efficiency HP Eurovent: 23.05.001 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

SIGMA SGM100HPPROX is a heat pump VRF outdoor unit with a cooling capacity of 10 HP (28,0 kW). It uses R410A refrigerant and has SEER 6,70 / SCOP 4,23 efficiency ratings. It offers a cooling sound power of 82,0 dB(A), a 980×1690×750 mm body, connection for up to 16 indoor units. It is ranked #120 by SEER among 223 models in the 10 HP class (class average SEER 6,85).

10 HP class 223 models SEER rank: 120 Class avg. SEER 6,85 Highest 8,69

Performance

Cooling
Nominal capacity	28,00 kW
Power input	13,33 kW
EER (rated)	2,10
SEER (seasonal) ℹ	6,70
Heating
Nominal capacity	28,00 kW
Power input	7,47 kW
COP (rated)	3,75
SCOP (seasonal) ℹ	4,23
Test configuration
Indoor unit combination	AB242MRERA*4 (Cassette)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	16
Air flow	11.000 m³/h
Dimensions & Weight
Dimensions (H×W×D)	1690 × 980 × 750 mm
Weight	224 kg
Sound (LwA)
In cooling	82,0 dB(A)
In heating	82,0 dB(A)
Operating temperature
Cooling range	-5°C ÷ 50°C
Heating range	-23°C ÷ 21°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.690 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.