SDV6-E730ATI

26 HP 73,0 kW cooling 73,0 kW heating R410A A+ efficiency HP Eurovent: 25.04.004 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

SINCLAIR SDV6-E730ATI is a heat pump VRF outdoor unit with a cooling capacity of 26 HP (73,0 kW). It uses R410A refrigerant and has SEER 5,84 / SCOP 4,15 efficiency ratings. It offers a cooling sound power of 89,0 dB(A). It is ranked #10 by SEER among 53 models in the 26 HP class (class average SEER 5,71).

26 HP class 53 models SEER rank: 10 Class avg. SEER 5,71 Highest 6,62

Performance

Cooling
Nominal capacity	73,00 kW
Power input	36,87 kW
EER (rated)	1,98
SEER (seasonal) ℹ	5,84
Heating
Nominal capacity	73,00 kW
Power input	23,55 kW
COP (rated)	3,10
SCOP (seasonal) ℹ	4,15
Test configuration
Indoor unit combination	6x SDV6-DM90+2x SDV6-DM112 (ducted)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	—
Dimensions & Weight
Dimensions (H×W×D)	— × — × — mm
Weight	— kg
Sound (LwA)
In cooling	89,0 dB(A)
In heating	89,0 dB(A)
Operating temperature
Cooling range	—°C ÷ —°C
Heating range	—°C ÷ —°C

📐 Ölçü bilgisi henüz girilmedi.
Bu ürünün boyut ve teknik çizim bilgileri için üreticinin teknik dokümanını inceleyebilirsiniz.

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.