Brands › HITACHI › Centrifugal Series › RASC-4HNPE / RPI-1.0FSR1E / RPI-1.0FSR1E / RPI-1.0FSR1E / RPI-1.0FSR1E

❄

HITACHI · Centrifugal Series

RASC-4HNPE / RPI-1.0FSR1E / RPI-1.0FSR1E / RPI-1.0FSR1E / RPI-1.0FSR1E

4 HP 10,0 kW cooling 10,0 kW heating R410A A+ efficiency HP Eurovent: 14.11.001 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

HITACHI RASC-4HNPE / RPI-1.0FSR1E / RPI-1.0FSR1E / RPI-1.0FSR1E / RPI-1.0FSR1E is a heat pump VRF outdoor unit with a cooling capacity of 4 HP (10,0 kW). It uses R410A refrigerant and has SEER 5,60 / SCOP 3,98 efficiency ratings. It is ranked #178 by SEER among 193 models in the 4 HP class (class average SEER 7,18).

4 HP class 193 models SEER rank: 178 Class avg. SEER 7,18 Highest 10,00

Performance

Cooling
Nominal capacity	10,00 kW
Power input	2,99 kW
EER (rated)	3,35
SEER (seasonal) ℹ	5,60
Heating
Nominal capacity	10,00 kW
Power input	2,63 kW
COP (rated)	3,80
SCOP (seasonal) ℹ	3,98
Test configuration
Indoor unit combination	4x RPI-1.0FSRE (Ducted)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	—
Dimensions & Weight
Dimensions (H×W×D)	— × — × — mm
Weight	— kg
Sound (LwA)
In cooling	—
In heating	—
Operating temperature
Cooling range	—°C ÷ —°C
Heating range	—°C ÷ —°C

📐 Ölçü bilgisi henüz girilmedi.
Bu ürünün boyut ve teknik çizim bilgileri için üreticinin teknik dokümanını inceleyebilirsiniz.

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.