RAS-16FS(X)NPE1

16 HP 45,0 kW cooling 45,0 kW heating R410A A++ efficiency HP Eurovent: 14.11.001 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

HITACHI RAS-16FS(X)NPE1 is a heat pump VRF outdoor unit with a cooling capacity of 16 HP (45,0 kW). It uses R410A refrigerant and has SEER 7,27 / SCOP 4,60 efficiency ratings. It offers a cooling sound power of 85,0 dB(A). It is ranked #27 by SEER among 167 models in the 16 HP class (class average SEER 6,61).

16 HP class 167 models SEER rank: 27 Class avg. SEER 6,61 Highest 8,93

Performance

Cooling
Nominal capacity	45,00 kW
Power input	13,64 kW
EER (rated)	3,30
SEER (seasonal) ℹ	7,27
Heating
Nominal capacity	45,00 kW
Power input	13,60 kW
COP (rated)	3,31
SCOP (seasonal) ℹ	4,60
Test configuration
Indoor unit combination	4x RPI-4.0FSR1E (Ducted)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	—
Dimensions & Weight
Dimensions (H×W×D)	— × — × — mm
Weight	— kg
Sound (LwA)
In cooling	85,0 dB(A)
In heating	87,0 dB(A)
Operating temperature
Cooling range	—°C ÷ —°C
Heating range	—°C ÷ —°C

📐 Ölçü bilgisi henüz girilmedi.
Bu ürünün boyut ve teknik çizim bilgileri için üreticinin teknik dokümanını inceleyebilirsiniz.

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.