PUMY-SM125YKM

5 HP 14,0 kW cooling 16,0 kW heating R32 A+++ efficiency HP Eurovent: 15.10.006 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

MITSUBISHI ELECTRIC PUMY-SM125YKM is a heat pump VRF outdoor unit with a cooling capacity of 5 HP (14,0 kW). It uses R32 refrigerant and has SEER 8,69 / SCOP 5,17 efficiency ratings. It offers a cooling sound power of 73,0 dB(A), a 1050×981×330 mm body, connection for up to 12 indoor units. It is ranked #10 by SEER among 181 models in the 5 HP class (class average SEER 7,11).

5 HP class 181 models SEER rank: 10 Class avg. SEER 7,11 Highest 9,36

Performance

Cooling
Nominal capacity	14,00 kW
Power input	3,68 kW
EER (rated)	3,80
SEER (seasonal) ℹ	8,69
Heating
Nominal capacity	16,00 kW
Power input	3,69 kW
COP (rated)	4,34
SCOP (seasonal) ℹ	5,17
Test configuration
Indoor unit combination	PLFY-M50VEM6-E / PLFY-M71VEM6-E (Cassette)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R32
Power supply	400-3-50
Max. indoor units	12
Air flow	4.980 m³/h
Fan count	1
Compressor count	1
Dimensions & Weight
Dimensions (H×W×D)	981 × 1050 × 330 mm
Weight	97 kg
Sound (LwA)
In cooling	73,0 dB(A)
In heating	76,0 dB(A)
Sound pressure (1m)
In cooling	53,0 dB(A)
In heating	—
Operating temperature
Cooling range	-5°C ÷ 52°C
Heating range	-20°C ÷ 15°C

Üstten görünüş

Ölçüler mm

Yükseklik: 981 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.