PUMY-P200YKM4

8 HP 22,4 kW cooling 25,0 kW heating R410A A++ efficiency HP Eurovent: 15.10.006 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

MITSUBISHI ELECTRIC PUMY-P200YKM4 is a heat pump VRF outdoor unit with a cooling capacity of 8 HP (22,4 kW). It uses R410A refrigerant and has SEER 7,15 / SCOP 3,66 efficiency ratings. It offers a cooling sound power of 76,0 dB(A). It is ranked #72 by SEER among 160 models in the 8 HP class (class average SEER 7,03).

8 HP class 160 models SEER rank: 72 Class avg. SEER 7,03 Highest 8,90

Performance

Cooling
Nominal capacity	22,40 kW
Power input	7,18 kW
EER (rated)	3,12
SEER (seasonal) ℹ	7,15
Heating
Nominal capacity	25,00 kW
Power input	5,85 kW
COP (rated)	4,27
SCOP (seasonal) ℹ	3,66
Test configuration
Indoor unit combination	PLFY-M50VEM6-E / PLFY-M50VEM6-E / PLFY-M50VEM6-E / PLFY-M50VEM6-E (Cassette)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	—
Dimensions & Weight
Dimensions (H×W×D)	— × — × — mm
Weight	— kg
Sound (LwA)
In cooling	76,0 dB(A)
In heating	80,0 dB(A)
Operating temperature
Cooling range	—°C ÷ —°C
Heating range	—°C ÷ —°C

📐 Ölçü bilgisi henüz girilmedi.
Bu ürünün boyut ve teknik çizim bilgileri için üreticinin teknik dokümanını inceleyebilirsiniz.

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.