PUMY-P125YKM5

5 HP 14,0 kW cooling 16,0 kW heating R410A A++ efficiency HP Eurovent: 15.10.006 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

MITSUBISHI ELECTRIC PUMY-P125YKM5 is a heat pump VRF outdoor unit with a cooling capacity of 5 HP (14,0 kW). It uses R410A refrigerant and has SEER 6,37 / SCOP 4,40 efficiency ratings. It offers a cooling sound power of 70,0 dB(A), a 1050×1338×330 mm body, connection for up to 10 indoor units. It is ranked #155 by SEER among 181 models in the 5 HP class (class average SEER 7,11).

5 HP class 181 models SEER rank: 155 Class avg. SEER 7,11 Highest 9,36

Performance

Cooling
Nominal capacity	14,00 kW
Power input	5,00 kW
EER (rated)	2,80
SEER (seasonal) ℹ	6,37
Heating
Nominal capacity	16,00 kW
Power input	4,06 kW
COP (rated)	3,94
SCOP (seasonal) ℹ	4,40
Test configuration
Indoor unit combination	PEFY-M50VMA(L)-A1 / PEFY-M71VMA(L)-A1 (Ducted)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	10
Air flow	6.600 m³/h
Fan count	2
Compressor count	1
Dimensions & Weight
Dimensions (H×W×D)	1338 × 1050 × 330 mm
Weight	125 kg
Sound (LwA)
In cooling	70,0 dB(A)
In heating	72,0 dB(A)
Sound pressure (1m)
In cooling	50,0 dB(A)
In heating	52,0 dB(A)
Operating temperature
Cooling range	—°C ÷ —°C
Heating range	—°C ÷ —°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.338 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.