PUMY-M200YKM

8 HP 22,4 kW cooling 25,0 kW heating R32 A++ efficiency HP Eurovent: 15.10.006 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

MITSUBISHI ELECTRIC PUMY-M200YKM is a heat pump VRF outdoor unit with a cooling capacity of 8 HP (22,4 kW). It uses R32 refrigerant and has SEER 7,21 / SCOP 4,44 efficiency ratings. It offers a cooling sound power of 74,0 dB(A), a 1050×1338×330 mm body, connection for up to 12 indoor units. It is ranked #67 by SEER among 160 models in the 8 HP class (class average SEER 7,03).

8 HP class 160 models SEER rank: 67 Class avg. SEER 7,03 Highest 8,90

Performance

Cooling
Nominal capacity	22,40 kW
Power input	7,18 kW
EER (rated)	3,12
SEER (seasonal) ℹ	7,21
Heating
Nominal capacity	25,00 kW
Power input	5,85 kW
COP (rated)	4,27
SCOP (seasonal) ℹ	4,44
Test configuration
Indoor unit combination	PEFY-M50VMA(L)-A1 / PEFY-M50VMA(L)-A1 / PEFY-M50VMA(L)-A1 / PEFY-M50VMA(L)-A1 (Ducted)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R32
Power supply	400-3-50
Max. indoor units	12
Air flow	8.040 m³/h
Fan count	2
Compressor count	1
Dimensions & Weight
Dimensions (H×W×D)	1338 × 1050 × 330 mm
Weight	128 kg
Sound (LwA)
In cooling	74,0 dB(A)
In heating	79,0 dB(A)
Sound pressure (1m)
In cooling	56,0 dB(A)
In heating	—
Operating temperature
Cooling range	-5°C ÷ 52°C
Heating range	-20°C ÷ 15°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.338 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.