MSAN6-XMi 260T

9 HP 26,0 kW cooling 26,0 kW heating R410A Mini VRF A++ efficiency HP Eurovent: 26.01.015 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

CLIVET MSAN6-XMi 260T is a heat pump VRF outdoor unit with a cooling capacity of 9 HP (26,0 kW). It uses R410A refrigerant and has SEER 6,55 / SCOP 4,53 efficiency ratings. It offers a cooling sound power of 78,0 dB(A). It is ranked #63 by SEER among 83 models in the 9 HP class (class average SEER 6,91).

9 HP class 83 models SEER rank: 63 Class avg. SEER 6,91 Highest 8,34

Performance

Cooling
Nominal capacity	26,00 kW
Power input	10,04 kW
EER (rated)	2,59
SEER (seasonal) ℹ	6,55
Heating
Nominal capacity	26,00 kW
Power input	6,86 kW
COP (rated)	3,79
SCOP (seasonal) ℹ	4,53
Test configuration
Indoor unit combination	2x MIH45Q4N18(Q) + 2x MIH90Q4N18(Q) (cassette)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Not possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	—
Dimensions & Weight
Dimensions (H×W×D)	— × — × — mm
Weight	— kg
Sound (LwA)
In cooling	78,0 dB(A)
In heating	78,0 dB(A)
Operating temperature
Cooling range	—°C ÷ —°C
Heating range	—°C ÷ —°C

📐 Ölçü bilgisi henüz girilmedi.
Bu ürünün boyut ve teknik çizim bilgileri için üreticinin teknik dokümanını inceleyebilirsiniz.

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.