MDV-V28WDN1(AtB)/1x MIH28Q4N18+1x MIH45Q4N18(Q)

3 HP 7,2 kW cooling 7,2 kW heating R410A A efficiency HP Eurovent: 26.01.015 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

MIDEA MDV-V28WDN1(AtB)/1x MIH28Q4N18+1x MIH45Q4N18(Q) is a heat pump VRF outdoor unit with a cooling capacity of 3 HP (7,2 kW). It uses R410A refrigerant and has SEER 5,10 / SCOP 3,80 efficiency ratings. It offers a cooling sound power of 67,0 dB(A), a 910×712×426 mm body, connection for up to 4 indoor units. It is ranked #90 by SEER among 129 models in the 3 HP class (class average SEER 5,42).

3 HP class 129 models SEER rank: 90 Class avg. SEER 5,42 Highest 7,28

Performance

Cooling
Nominal capacity	7,20 kW
Power input	2,18 kW
EER (rated)	3,30
SEER (seasonal) ℹ	5,10
Heating
Nominal capacity	7,20 kW
Power input	2,06 kW
COP (rated)	3,50
SCOP (seasonal) ℹ	3,80
Test configuration
Indoor unit combination	1x MIH28Q4N18+1x MIH45Q4N18(Q) (cassette)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	230-1-50
Max. indoor units	4
Fan count	1
Compressor count	1
Dimensions & Weight
Dimensions (H×W×D)	712 × 910 × 426 mm
Weight	49 kg
Sound (LwA)
In cooling	67,0 dB(A)
In heating	67,0 dB(A)
Sound pressure (1m)
In cooling	54,0 dB(A)
In heating	—
Operating temperature
Cooling range	-5°C ÷ 55°C
Heating range	-15°C ÷ 27°C

Üstten görünüş

Ölçüler mm

Yükseklik: 712 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.