K3F-500 DN4S

16 HP 45,0 kW cooling 45,0 kW heating R410A A++ efficiency HR Eurovent: 16.12.022 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

KAYSUN K3F-500 DN4S is a heat recovery VRF outdoor unit with a cooling capacity of 16 HP (45,0 kW). It uses R410A refrigerant and has SEER 6,60 / SCOP 4,30 efficiency ratings. It offers a cooling sound power of 85,0 dB(A). It is ranked #65 by SEER among 167 models in the 16 HP class (class average SEER 6,61).

16 HP class 167 models SEER rank: 65 Class avg. SEER 6,61 Highest 8,93

Performance

Cooling
Nominal capacity	45,00 kW
Power input	18,75 kW
EER (rated)	2,40
SEER (seasonal) ℹ	6,60
Heating
Nominal capacity	45,00 kW
Power input	13,24 kW
COP (rated)	3,40
SCOP (seasonal) ℹ	4,30
Test configuration
Indoor unit combination	4x MIH71T2N18(Q)+2x MIH90T2N18(Q) (ducted)

Physical & Environmental

General
System type	HR (Heat Recovery)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	—
Dimensions & Weight
Dimensions (H×W×D)	— × — × — mm
Weight	— kg
Sound (LwA)
In cooling	85,0 dB(A)
In heating	85,0 dB(A)
Operating temperature
Cooling range	—°C ÷ —°C
Heating range	—°C ÷ —°C

📐 Ölçü bilgisi henüz girilmedi.
Bu ürünün boyut ve teknik çizim bilgileri için üreticinin teknik dokümanını inceleyebilirsiniz.

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçildiğinde otomatik dolar; dilerseniz değiştirebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

The estimate splits the province's hourly 2009–2023 climate data (TMYx) into 1 °C bins. In each bin the building load is compared with the unit's Eurovent part-load values and the manufacturer curve. Hours outside the schedule count as standby; if setback heating is selected, low-load heating is also included when outdoor air drops below the threshold. Results reflect a typical year; actual consumption may vary with the year, installation and use.