FDC560KXZRE2

20 HP 56,0 kW cooling 56,0 kW heating R410A A+ efficiency HP Eurovent: 18.05.001 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

MITSUBISHI HEAVY INDUSTRIES FDC560KXZRE2 is a heat pump VRF outdoor unit with a cooling capacity of 20 HP (56,0 kW). It uses R410A refrigerant and has SEER 5,80 / SCOP 4,21 efficiency ratings. It offers a cooling sound power of 84,0 dB(A). It is ranked #110 by SEER among 132 models in the 20 HP class (class average SEER 6,40).

20 HP class 132 models SEER rank: 110 Class avg. SEER 6,40 Highest 8,42

Performance

Cooling
Nominal capacity	56,00 kW
Power input	22,40 kW
EER (rated)	2,50
SEER (seasonal) ℹ	5,80
Heating
Nominal capacity	56,00 kW
Power input	16,18 kW
COP (rated)	3,46
SCOP (seasonal) ℹ	4,21
Test configuration
Indoor unit combination	FDUM71KXE6F/FDUM71KXE6F/FDUM71KXE6F/FDUM71KXE6F/FDUM71KXE6F/FDUM71KXE6F/FDUM71KXE6F/FDUM71KXE6F (Ducted)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	—
Dimensions & Weight
Dimensions (H×W×D)	— × — × — mm
Weight	— kg
Sound (LwA)
In cooling	84,0 dB(A)
In heating	83,0 dB(A)
Operating temperature
Cooling range	—°C ÷ —°C
Heating range	—°C ÷ —°C

📐 Ölçü bilgisi henüz girilmedi.
Bu ürünün boyut ve teknik çizim bilgileri için üreticinin teknik dokümanını inceleyebilirsiniz.

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.