CHV-5S120NM2

4 HP 12,1 kW cooling 12,1 kW heating R410A Mini VRF A++ efficiency HP Eurovent: 19.12.005 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

COOPER&HUNTER CHV-5S120NM2 is a heat pump VRF outdoor unit with a cooling capacity of 4 HP (12,1 kW). It uses R410A refrigerant and has SEER 6,70 / SCOP 3,93 efficiency ratings. It offers a cooling sound power of 72,0 dB(A). It is ranked #127 by SEER among 193 models in the 4 HP class (class average SEER 7,18).

4 HP class 193 models SEER rank: 127 Class avg. SEER 7,18 Highest 10,00

Performance

Cooling
Nominal capacity	12,10 kW
Power input	3,67 kW
EER (rated)	3,30
SEER (seasonal) ℹ	6,70
Heating
Nominal capacity	12,10 kW
Power input	3,14 kW
COP (rated)	3,85
SCOP (seasonal) ℹ	3,93
Test configuration
Indoor unit combination	3x GMV-ND28T/C-T+1x GMV-ND36T/C-T (cassette)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Not possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	—
Dimensions & Weight
Dimensions (H×W×D)	— × — × — mm
Weight	— kg
Sound (LwA)
In cooling	72,0 dB(A)
In heating	75,0 dB(A)
Operating temperature
Cooling range	—°C ÷ —°C
Heating range	—°C ÷ —°C

📐 Ölçü bilgisi henüz girilmedi.
Bu ürünün boyut ve teknik çizim bilgileri için üreticinin teknik dokümanını inceleyebilirsiniz.

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.