AW-YEV250HR-H16

8 HP 22,4 kW cooling 22,4 kW heating R410A A+ efficiency HP Eurovent: 18.06.004 Eurovent+

↓ Run simulation for this unit ♡ Add to favorites

AIRWELL AW-YEV250HR-H16 is a heat pump VRF outdoor unit with a cooling capacity of 8 HP (22,4 kW). It uses R410A refrigerant and has SEER 5,71 / SCOP 3,76 efficiency ratings. It offers a cooling sound power of 86,0 dB(A), a 980×1690×750 mm body, connection for up to 13 indoor units. It is ranked #144 by SEER among 160 models in the 8 HP class (class average SEER 7,03).

8 HP class 160 models SEER rank: 144 Class avg. SEER 7,03 Highest 8,90

Performance

Cooling
Nominal capacity	22,40 kW
Power input	6,75 kW
EER (rated)	3,32
SEER (seasonal) ℹ	5,71
Heating
Nominal capacity	22,40 kW
Power input	6,42 kW
COP (rated)	3,49
SCOP (seasonal) ℹ	3,76
Test configuration
Indoor unit combination	CVTA-050/045N-01M22*4 (Cassette)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	13
Air flow	11.000 m³/h
Fan count	1
Compressor count	1
Dimensions & Weight
Dimensions (H×W×D)	1690 × 980 × 750 mm
Weight	255 kg
Sound (LwA)
In cooling	86,0 dB(A)
In heating	81,0 dB(A)
Operating temperature
Cooling range	-5°C ÷ 52°C
Heating range	-27°C ÷ 21°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.690 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.