AVWT-170HKF5S

18 HP 50,4 kW cooling 50,4 kW heating R410A A++ efficiency HP Eurovent: 18.02.005 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

HISENSE AVWT-170HKF5S is a heat pump VRF outdoor unit with a cooling capacity of 18 HP (50,4 kW). It uses R410A refrigerant and has SEER 7,10 / SCOP 4,36 efficiency ratings. It offers a cooling sound power of 89,0 dB(A), a 940×1800×825 mm body, connection for up to 36 indoor units. It is ranked #32 by SEER among 155 models in the 18 HP class (class average SEER 6,58).

18 HP class 155 models SEER rank: 32 Class avg. SEER 6,58 Highest 8,67

Performance

Cooling
Nominal capacity	50,40 kW
Power input	16,80 kW
EER (rated)	3,00
SEER (seasonal) ℹ	7,10
Heating
Nominal capacity	50,40 kW
Power input	12,06 kW
COP (rated)	4,18
SCOP (seasonal) ℹ	4,36
Test configuration
Indoor unit combination	AVD-19HJFH(R) , AVD-24HJFH(Q) (Ducted)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	36
Air flow	17.520 m³/h
Fan count	1
Compressor count	1
Dimensions & Weight
Dimensions (H×W×D)	1800 × 940 × 825 mm
Weight	245 kg
Sound (LwA)
In cooling	89,0 dB(A)
In heating	89,0 dB(A)
Operating temperature
Cooling range	-15°C ÷ 55°C
Heating range	-30°C ÷ 16°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.800 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.