ARUM220LTE6

22 HP 61,6 kW cooling 61,6 kW heating R410A A++ efficiency HP HR capable Eurovent: 14.12.005 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

LG ARUM220LTE6 is a heat pump VRF outdoor unit with a cooling capacity of 22 HP (61,6 kW). It uses R410A refrigerant and has SEER 7,20 / SCOP 4,62 efficiency ratings. It offers a cooling sound power of 84,0 dB(A), a 1640×1745×760 mm body, connection for up to 35 indoor units. It is ranked #5 by SEER among 94 models in the 22 HP class (class average SEER 6,30).

22 HP class 94 models SEER rank: 5 Class avg. SEER 6,30 Highest 7,88

Performance

Cooling
Nominal capacity	61,60 kW
Power input	22,00 kW
EER (rated)	2,80
SEER (seasonal) ℹ	7,20
Heating
Nominal capacity	61,60 kW
Power input	15,96 kW
COP (rated)	3,86
SCOP (seasonal) ℹ	4,62
Test configuration
Indoor unit combination	6 × ARNU24GTAA4 / 2 × ARNU36GTAA4 (cassette)

Physical & Environmental

General
System type	HP (Heat Pump · can also operate as heat recovery)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	35
Air flow	25.800 m³/h
Fan count	2
Compressor count	2
Dimensions & Weight
Dimensions (H×W×D)	1745 × 1640 × 760 mm
Weight	362 kg
Sound (LwA)
In cooling	84,0 dB(A)
In heating	88,0 dB(A)
Sound pressure (1m)
In cooling	64,0 dB(A)
In heating	66,0 dB(A)
Operating temperature
Cooling range	-10°C ÷ 48°C
Heating range	-25°C ÷ 18°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.745 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.