ARUM080LTE6

8 HP 22,4 kW cooling 22,4 kW heating R410A A++ efficiency HP HR capable Eurovent: 14.12.005 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

LG ARUM080LTE6 is a heat pump VRF outdoor unit with a cooling capacity of 8 HP (22,4 kW). It uses R410A refrigerant and has SEER 8,28 / SCOP 4,45 efficiency ratings. It offers a cooling sound power of 78,0 dB(A), a 930×1745×760 mm body, connection for up to 13 indoor units. It is ranked #7 by SEER among 160 models in the 8 HP class (class average SEER 7,03).

8 HP class 160 models SEER rank: 7 Class avg. SEER 7,03 Highest 8,90

Performance

Cooling
Nominal capacity	22,40 kW
Power input	6,10 kW
EER (rated)	3,67
SEER (seasonal) ℹ	8,28
Heating
Nominal capacity	22,40 kW
Power input	5,16 kW
COP (rated)	4,34
SCOP (seasonal) ℹ	4,45
Test configuration
Indoor unit combination	4 x ARNU18GTAA4 (cassette)

Physical & Environmental

General
System type	HP (Heat Pump · can also operate as heat recovery)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	13
Air flow	13.200 m³/h
Fan count	1
Compressor count	1
Dimensions & Weight
Dimensions (H×W×D)	1745 × 930 × 760 mm
Weight	215 kg
Sound (LwA)
In cooling	78,0 dB(A)
In heating	78,0 dB(A)
Sound pressure (1m)
In cooling	57,0 dB(A)
In heating	58,0 dB(A)
Operating temperature
Cooling range	-10°C ÷ 48°C
Heating range	-25°C ÷ 18°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.745 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.