AM050BXMDER

5 HP 14,0 kW cooling 14,0 kW heating R410A Mini VRF A++ efficiency HP HR capable Eurovent: 24.06.007 Eurovent+

↓ Run simulation for this unit ♡ Add to favorites

SAMSUNG AM050BXMDER is a heat pump VRF outdoor unit with a cooling capacity of 5 HP (14,0 kW). It uses R410A refrigerant and has SEER 7,40 / SCOP 4,65 efficiency ratings. It offers a cooling sound power of 69,0 dB(A), a 940×1210×330 mm body, connection for up to 9 indoor units. It is ranked #70 by SEER among 181 models in the 5 HP class (class average SEER 7,11).

5 HP class 181 models SEER rank: 70 Class avg. SEER 7,11 Highest 9,36

Performance

Cooling
Nominal capacity	14,00 kW
Power input	4,83 kW
EER (rated)	2,90
SEER (seasonal) ℹ	7,40
Heating
Nominal capacity	14,00 kW
Power input	3,64 kW
COP (rated)	3,85
SCOP (seasonal) ℹ	4,65
Test configuration
Indoor unit combination	4x AM036AN4PKH (Cassette)

Physical & Environmental

General
System type	HP (Heat Pump · can also operate as heat recovery)
Cooling type	Air-cooled
Combination	Not possible
Refrigerant	R410A
Power supply	230-1-50
Max. indoor units	9
Air flow	6.000 m³/h
Fan count	2
Compressor count	1
Dimensions & Weight
Dimensions (H×W×D)	1210 × 940 × 330 mm
Weight	97 kg
Sound (LwA)
In cooling	69,0 dB(A)
In heating	73,0 dB(A)
Sound pressure (1m)
In cooling	52,0 dB(A)
In heating	55,0 dB(A)
Operating temperature
Cooling range	-5°C ÷ 48°C
Heating range	-25°C ÷ 26°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.210 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.