AER-CS500CHOU

18 HP 50,0 kW cooling 50,0 kW heating R410A A++ efficiency HP Eurovent: 18.02.005 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

AEROSTAR AER-CS500CHOU is a heat pump VRF outdoor unit with a cooling capacity of 18 HP (50,0 kW). It uses R410A refrigerant and has SEER 6,44 / SCOP 4,16 efficiency ratings. It offers a cooling sound power of 87,0 dB(A), a 1210×1730×750 mm body, connection for up to 29 indoor units. It is ranked #97 by SEER among 155 models in the 18 HP class (class average SEER 6,58).

18 HP class 155 models SEER rank: 97 Class avg. SEER 6,58 Highest 8,67

Performance

Cooling
Nominal capacity	50,00 kW
Power input	20,83 kW
EER (rated)	2,40
SEER (seasonal) ℹ	6,44
Heating
Nominal capacity	50,00 kW
Power input	15,02 kW
COP (rated)	3,33
SCOP (seasonal) ℹ	4,16
Test configuration
Indoor unit combination	AVBC-22HJDBA(R) (Cassette)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	29
Air flow	12.000 m³/h
Fan count	2
Compressor count	1
Dimensions & Weight
Dimensions (H×W×D)	1730 × 1210 × 750 mm
Weight	296 kg
Sound (LwA)
In cooling	87,0 dB(A)
In heating	87,0 dB(A)
Operating temperature
Cooling range	-5°C ÷ 52°C
Heating range	-25°C ÷ 16°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.730 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.