38VF020H119018-Ei

20 HP 56,0 kW cooling 56,0 kW heating R410A A++ efficiency HP Eurovent: 17.09.016 Eurovent ✓

↓ Run simulation for this unit ♡ Add to favorites

CARRIER 38VF020H119018-Ei is a heat pump VRF outdoor unit with a cooling capacity of 20 HP (56,0 kW). It uses R410A refrigerant and has SEER 6,65 / SCOP 4,41 efficiency ratings. It offers a cooling sound power of 88,0 dB(A), a 1340×1760×825 mm body, connection for up to 33 indoor units. It is ranked #36 by SEER among 132 models in the 20 HP class (class average SEER 6,40).

20 HP class 132 models SEER rank: 36 Class avg. SEER 6,40 Highest 8,42

Performance

Cooling
Nominal capacity	56,00 kW
Power input	22,22 kW
EER (rated)	2,52
SEER (seasonal) ℹ	6,65
Heating
Nominal capacity	56,00 kW
Power input	14,93 kW
COP (rated)	3,75
SCOP (seasonal) ℹ	4,41
Test configuration
Indoor unit combination	8x 42VD024H115003018-E (ducted)

Physical & Environmental

General
System type	HP (Heat Pump)
Cooling type	Air-cooled
Combination	Possible
Refrigerant	R410A
Power supply	400-3-50
Max. indoor units	33
Air flow	22.000 m³/h
Fan count	2
Compressor count	1
Dimensions & Weight
Dimensions (H×W×D)	1760 × 1340 × 825 mm
Weight	277 kg
Sound (LwA)
In cooling	88,0 dB(A)
In heating	88,0 dB(A)
Operating temperature
Cooling range	-15°C ÷ 55°C
Heating range	-30°C ÷ 30°C

Üstten görünüş

Ölçüler mm

Yükseklik: 1.760 mm

⚡ Energy simulation for this unit

Bina tipi

Şehir / Bölge

Alan (m²)

Çalışma Profili

Soğutma saat/gün

Isıtma saat/gün

Soğutma gün/yıl

Isıtma gün/yıl

Bina tipi ve şehir seçince otomatik doldurulur. İsterseniz override edebilirsiniz.

Pro · EN 14825 bin method

Province

Weather station

Design temperature (ASHRAE)

Start hour

Operating hours/day

Days/week

Intended use

Load basis

Balance temperature (°C) ℹ

Indoor setpoint heating (°C) ℹ

Indoor setpoint cooling (°C)

After-hours setback heating ℹ

Hourly TMYx (2009–2023) climate data is split into 1 °C bins; in each bin the building load is met with capacity and COP/EER derived from the product's Eurovent part-load points. Hours outside the operating schedule count as standby consumption; with after-hours setback heating selected, low-load heating is also computed in those hours whenever the outdoor air drops below the threshold.